Is your PC showing “Driver Overran Stack Buffer”? This means you are in big trouble. Hurry up and no more neglect this BSOD error, you have to fix this error without any further delay. Malware attacks, old drivers, and other stuff can be the cause of this problem. You need to take some serious actions when you see this blue screen death error appearing on the screen.
Now the main problem is how to solve this issue. There is nothing to worry about this article will help you to get rid of this error as soon as possible. All you need to do is to read all the methods carefully and follow all the steps exactly as mentioned.
Contents
What Is ‘Driver Overran Stack Buffer’ Error?
Driver overran stack buffer is a Blue screen of death error abbreviated as BSOD error that gets displayed when your system goes through some technical issues such as old drivers, malware attack, etc. You will be able to see this error when you restart your system or when you reopen it after shutting it down. So, why your system displays this error more often?
Your system displays this error to warn you that there are some serious issues with the PC and the PC defends itself to avoid further major problems like loss of personal data, damage to hardware and software. The driver overran its local variable.
This is the classic “buffer overrun” hacking attack. The system has been brought down to prevent a malicious user from gaining complete control of it. So try to come out of this error as soon as possible. Read all methods carefully that are mentioned down below to know how to solve this error.
How To Fix Driver Overran Stack Buffer Error?
There are 5 easy and simple methods to overcome this BSOD error.
Method 1: Resetting Your PC
You can use this method if you are receiving this message only while restarting your PC or when you switch it on and if your PC is allowing you to operate it like before. However, resetting your PC removes all foreign apps and personal data and brings your system back to the factory settings, and boosts the performance of the PC.
This will help you in removing the apps and files which are the breeding ground for this trouble. Make sure all your important documents and files are uploaded to One Drive before you reset your PC so that you will not miss your important stuff.
How To Reset Your PC
Resetting your pc is a very simple task. Follow the steps to know how to reset.
- Go to start.
- Search “Settings“.
- Then choose “Update and Security“.
- Now go to recovery.
- Then click on Reset this PC.
- Then select “Remove everything“.
Method 2: Check For Updates
The BSOD error can be caused by both hardware and software issues, but they can fix some security flaws, so if you want your PC to avoid errors, we recommend you to download the latest update for Windows. Follow the steps mentioned below to check for the latest updates and how to install them.
How To Update?
- Go to start.
- Search “Settings“.
- Then choose “Update and Security“.
- Windows Update opens itself.
- Then check “Updates available“.
- Download the updates if any by selecting the download option.
Method 3: Run Check Disk
You may get the DRIVER OVERRAN STACK BUFFER error because of the corruption issues on your hard drive. Checking Disk utility can test the integrity and fix the errors of your hard drive, and therefore can help you get rid of the error. To run this utility:
- Go to the” Start” menu at the bottom left of your screen, then type “Command Prompt“.
- When you see “Command Prompt” appear in the menu above, right-click it and then select “Run as administrator“.
- Then type “chdsk\r” in the Command prompt and hit the Enter key.
- You will be asked whether to run the check the next time the system restart, press the “Y” key, and then hit the “Enter” key.
- Close the Command Prompt.
- Now restart your PC your system will run the check the next moment your system restarts.
Method 4: Update The Drivers
Sometimes old drivers may cause a “DRIVER OVERRAN STACK BUFFER” BSOD error to pop up. So it is also important to update the drivers. So check for the updates available and update them. Read the steps mentioned below to know how to update the drivers.
How To Update Drivers?
To know how to update drivers Follow the steps mentioned below carefully.
- Go to the start menu.
- Type device manager in the search bar.
- Now when you see Device manager appear in the menu above select it and hit enter.
- Then select the driver that needs an update by double-clicking on it or click on the arrow next to it.
- Then right-click on whatever displayed after selecting the driver, then left-click on “Update driver“.
- Now you can try searching automatically for the updated driver software in the first link, or you can directly install the software if you downloaded the update on your PC.
Method 5: Run Blue Screen Trouble Shooter
Windows troubleshoot is a built-in tool that deals with various system error windows most importantly it troubleshoot BSOD errors that cause unexpected system restart and shutdown.
Therefore, you can try this tool to fix DRIVER OVERRAN STACK BUFFER Windows 10. Let’s have a look at the detailed steps.
- Open Windows Settings and go ahead to Update & Security.
- Then select Troubleshoot.
- Locate and click Blue Screen in the right pane, and then click Run the troubleshooter.
The tool will start detecting problems. Just follow the instructions displayed to complete the troubleshooter if your PC detects the issues.
Conclusion
In conclusion, you came across many methods that will help you to come out of the BSOD error “DRIVER OVERRAN STACK BUFFER”, what it is, why this error occurs, and so on. Most of the methods are easy to follow. We hope you received enough help from this article.
Read all the steps carefully and follow them exactly to avoid further troubles and try to solve the error as soon as possible because if it is this error pops up due to a malware attack on your PC. Any queries, please mentions them in the comment section below.
Leave a Reply